Home » Posts tagged 'attic insulation'

Tag Archives: attic insulation

Types of Ceiling Insulation

Insulating the ceiling is one of the most effective ways to improve energy efficiency and lower utility bills. It reduces heat loss during the winter and prevents sunlight from dramatically increasing room temperature in the summer, reducing air conditioner workload.

Insulation

All types of insulation including spray foam, cellulose and batt have a certain level of thermal resistance, helping to regulate indoor temperatures. However, some products are more suited for specific spaces or projects. Connect with Ceiling Insulation Perth for reliable help.

A variety of materials can be used to insulate your home’s ceiling. They range from bulky fibers (such as fiberglass, rock and slag wool and cellulose) to rigid foam boards and sleek foils. Bulky materials resist conductive and convective heat flow within building cavities, while rigid foam insulation traps air or another gas to resist thermal transfer. Foil-based systems reflect radiant heat, which is helpful in cooling climates.

Insulation is often overlooked during construction, but it’s critical to the success of a building. It can improve indoor comfort, reduce energy consumption and help meet sustainability goals. It also helps minimise noise pollution in living spaces by reflecting sound waves rather than transmitting them.

Choosing the right insulation material for your project depends on your energy efficiency and environmental objectives, and your budget and building type. If you’re constructing a new house or adding insulation to an existing one, consult an experienced contractor for advice on the best solution for your needs.

In wood-frame construction, insulation is usually placed within the wall framing. This avoids “thermal bridging” that can occur when the structure’s wood studs come into contact with each other. The framing must be weatherproofed, however, to prevent rain from wicking moisture through the walls into the insulation layer.

Insulation may also be installed behind sheetrock. It can be blown into place using special equipment or poured in. It’s particularly useful in retrofitting insulated walls, or for insulating oddly shaped or irregular areas, or around obstructions. It’s more expensive than other insulating methods, but it provides excellent thermal and acoustic performance.

When installing insulation in an existing building, be sure to check the fire and building codes of your jurisdiction before attempting any do-it-yourself work. Some types of insulation, such as spray foam, can pose health risks during installation and should be left to professionals.

ROCKWOOL insulation is a good option for new homes and additions, or for renovating old buildings. It uses natural stone wool to improve energy efficiency, reducing heating and cooling costs while maintaining stable temperatures. The products are available in a wide range of sizes, thicknesses and formats to suit many different building types, from residential to commercial.

Spray Foam

Spray foam insulation, also known as polyurethane, is a unique combination of insulation and air sealing. Applied on-site, it creates an air tight seal and effectively boosts energy efficiency. It is also a highly effective sound-proofing material.

Spray foam can be sprayed on walls, roof decking, in wall cavities or through holes drilled into the wall. Two canisters of chemical ingredients come together at the tip of a gun and immediately expand into a thick foam.

This foam is a good choice for attics, as it can reduce the flow of hot or cool air between the living area and the vented attic space below. This can significantly reduce cooling bills and heating costs, making this insulation an excellent investment in your home’s energy performance.

There are two primary types of spray foam: open and closed cell. Open cell foam has cells that aren’t completely encapsulated and can be easily penetrated by water, moss or dust. Closed cell spray foam, on the other hand, has cells that are closed and pressed together. It is much firmer and more rigid than open cell foam.

Both of these products are great options for insulating your home, but it’s important to find a professional who understands how to properly install them and will take into account the climate and moisture issues in your house. If you don’t take these factors into consideration, you may be putting your home at risk for future damage and high energy costs.

When spray foam is installed, the installers will cover flooring, windows, doors and other surfaces with plastic to protect them from the expanding foam. They will then run a hose to the location where they are going to spray, suit up and start working. After they are done, they will clean up so that the work site looks just like it did before they began.

Many homeowners have concerns about off-gassing and VOCs (volatile organic compounds), but this really depends on the quality of the spray foam that is used. The spray foam that we use at Building Energy is non-toxic and has low VOCs. It also only off-gases for about 2 hours after installation, as opposed to 24 hours for some other brands.

Loose-Fill

Loose-fill insulation can be blown into wall cavities or attic spaces using special equipment. It can be a great solution for older homes that have no existing insulation, and it’s also well-suited for retrofitting wall and ceiling areas where other types of insulation can’t easily be installed. Loose-fill insulation can be made from cellulose, fiberglass, or mineral (rock or slag) wool and is typically produced using recycled waste materials. Cellulose is primarily made from recycled newsprint, while fiberglass and rock wool are spun from blast furnace slag and other waste products that would otherwise be wasted.

Loose insulation is an effective way to control air leakage and reduce energy costs. It also provides a comfortable home environment by reducing noise and blocking unwanted light from entering the space. Additionally, it acts as a barrier for mold and mildew and prevents the infiltration of outside air which can carry spores into the home.

If properly installed, loose-fill insulation can help protect a home against fire. It is composed of naturally fire-resistant materials such as paper and rock wool, and the installation process creates an airtight seal which helps to prevent sparks or embers from entering and igniting the insulation. In addition, loose-fill insulation will trap pollutants and allergens, which can be helpful for homeowners with respiratory conditions.

When installing loose-fill insulation in walls, it’s important to make sure that the cavity is completely filled with insulation at the proper density. Voids and gaps can occur if the cellulose or fiberglass loose-fill is installed at too low a density or if there are too few or improperly located installation holes between the wood framing studs.

Cellulose and rock wool loose-fill insulations settle more than fiberglass and slag wool. This is why cellulose manufacturers are required by federal law to specify the “installed thickness” on their bags, while fiberglass and slag wool producers simply list the settled R-value.

The settling of loose-fill insulation can cause some minor settling damage to the wood framing in the cavity, but this is generally minor and can be corrected by sanding or grinding down the loose fill as needed. The sanding or grinding is also necessary to remove any loose fibers that have been displaced by the settling of the insulation. Breathing in these loose fibres can lead to the development of asbestos-related health problems including lung cancer and mesothelioma.

Blanket

Consisting of batts or rolls, blanket insulation is one of the most common types of insulation. It is made up of small fibers—usually fiberglass—and is typically installed in unfinished walls (including foundation walls), floors and ceilings. It’s fitted between joists, studs and beams. Blanket insulation is effective in reducing sound as well as improving thermal efficiency.

It’s also easy to install, making it a great DIY option for home improvement. However, it’s important to know how much your home needs before attempting a project like this. A professional can assess your home and recommend the right amount of insulation for your project.

If you’re looking for the best way to save money on energy costs, insulating your ceiling is a smart choice. By keeping heat inside your home in winter and out of it in summer, you’ll cut down on your energy bill significantly.

In addition to saving you money, ceiling insulation is an eco-friendly solution. It helps reduce greenhouse gas emissions and keeps your home healthier and safer.

There are many different types of insulation, but you’ll want to choose the best option for your home. It’s important to consider the R-value, which is a measure of how well an insulation material blocks heat from escaping or entering a space. The higher the R-value, the more efficient it is.

Aside from choosing the best type of insulation, you’ll also want to ensure that it is correctly installed by a qualified insulation installer. An incorrectly installed insulation system will not be effective and may even cause damage to your roof structure.

Whether you’re installing ceiling insulation yourself or hiring someone else to do it for you, make sure to contact the expertsfor help. We can help you decide what kind of insulation is best for your home, as well as provide installation services.

We’re proud to offer both loose-fill and blanket insulation solutions for new homes and retrofits, as well as commercial projects. Contact us online to find out more or to speak with a team member directly. We look forward to helping you create a more comfortable and energy-efficient home.